Elite 5P-EXMU PWM 5-in-1 WLED Controller

Gledopto - GL-C-611WL

Elite 5P-EXMU PWM 5-in-1 WLED Controller

Name: Elite 5P-EXMU PWM 5-in-1 WLED Controller
Brand: Gledopto
SKU: GL-C-611WL
Price: 55.9 AUD
Availability: InStock

$55.90

Tax included.

5-in-1 WLED PWM controller for analogue LED strips, with Ethernet, Wi-Fi, built-in microphone and 5–48V DC support.

Ask a question

Size guide

Share

Elite 5P-EXMU PWM 5-in-1 WLED Controller

$55.90

WLED control for analogue LED strips

The Gledopto Elite 5P-EXMU (GL-C-611WL) brings WLED control to five common analogue LED strip configurations. Adjust brightness, colour and white colour temperature through the WLED app or browser interface, with wired Ethernet or Wi-Fi connectivity to suit your installation.

Use it for tunable-white kitchen lighting, RGBW display shelves or RGBCCT feature lighting. Its five PWM output channels support RGBCCT, RGBW, RGB, CCT and single-colour strips, so you can choose the strip configuration that fits your project.

Ethernet, Wi-Fi and sound-reactive lighting

Wired or wireless control: Connect to your router over Ethernet or configure Wi-Fi. Ethernet is configured by default, allowing network control without first setting up Wi-Fi.
Built-in PDM microphone: Use WLED's AudioReactive functionality for lighting that responds to sound, without an external microphone. Effects operate across the connected analogue channels rather than individually addressable pixels.
USB-C/UART interface: Provides access for firmware updates and advanced setup.
DIY expansion: An additional GPIO13 connection is available for custom projects.
On-device control: A physical button provides power, colour-change and reset functions.

Five strip modes, up to 48V

The controller supports DC supplies of 5V, 12V, 24V, 36V or 48V. Choose a supply voltage that matches your LED strip. Output is rated to a maximum of 10A per channel and 15A total across all channels; both limits apply.

A factory-fitted, replaceable 20A fuse provides circuit protection. The fuse rating does not increase the controller's 15A total output limit. USB-C input is limited to 5V and 3A maximum, so do not assume the main terminal current rating applies when powering through USB-C.

Specifications

Product	Elite 5P-EXMU PWM 5 in 1 WLED Controller
Model	Gledopto GL-C-611WL
Control platform	WLED
LED output	Five PWM channels for analogue constant-voltage LED strips
Supported configurations	RGBCCT, RGBW, RGB, CCT and single-colour dimming
DC input voltages	5V / 12V / 24V / 36V / 48V
Maximum output current	10A per channel; 15A total
USB-C input	5V DC, 3A maximum
Network connection	Ethernet and Wi-Fi
Audio	Built-in PDM microphone for WLED AudioReactive
Expansion	USB-C/UART and GPIO13
Fuse	Factory-fitted 20A replaceable fuse
Dimensions	129 × 50 × 23 mm
Housing	White flame-retardant PC
Operating temperature	-20°C to 45°C

Before you connect

Designed for compatible analogue PWM LED strips, not addressable LED pixel strips.
Match the power supply voltage to the strip and keep the wiring, connectors and loads within their ratings.
Disconnect power before wiring. Check all connections before switching on.
Install in a dry, protected location away from moisture, direct sunlight and excessive heat.

Model: Gledopto GL-C-611WL / Elite 5P-EXMU
Platform: WLED
Output: Five analogue PWM channels
Strip modes: RGBCCT, RGBW, RGB, CCT, single colour
DC input: 5V / 12V / 24V / 36V / 48V
Maximum output: 10A per channel, 15A total
USB-C input: 5V DC, 3A maximum
Connectivity: Ethernet and Wi-Fi
Microphone: Built-in PDM, WLED AudioReactive
Expansion: USB-C/UART and GPIO13
Fuse: Factory-fitted replaceable 20A fuse; controller output remains limited to 15A total
Dimensions: 129 × 50 × 23 mm
Housing: White flame-retardant PC
Operating temperature: -20°C to 45°C
Installation: Dry, protected location; not for addressable pixel strips

Which LED strips does it support? The Elite 5P-EXMU supports compatible constant-voltage analogue RGBCCT, RGBW, RGB, CCT and single-colour PWM strips. It is not an addressable-pixel controller.

Can I use Ethernet instead of Wi-Fi? Yes. Ethernet is configured by default, so you can connect the controller to your router without first configuring Wi-Fi.

Does it have a microphone? Yes. A built-in PDM microphone supports WLED AudioReactive lighting. Analogue strips respond across their channels rather than as individually addressable pixels.

What power supply do I need? Use a compatible DC supply at 5V, 12V, 24V, 36V or 48V to match your strip. Keep output below 10A per channel and 15A total. USB-C input is limited to 5V and 3A maximum; the fitted 20A fuse does not increase the output rating.

Product: https://www.gledopto.com/GL-C-611WL.html
User manual: https://www.gledopto.eu/mediafiles/anleitungen/7027-gl-c-611wl-eng.pdf

Shipping & Returns

Processing time

Orders are processed within 1–3 business days (Monday to Friday, excluding public holidays). Processing time begins on the day you place your order.

Shipping Rates

Service	Rate
Standard Shipping	$10 flat rate
Express Shipping	$15 flat rate
Expedited Dispatch	From $20, calculated at checkout
Free Standard Shipping	Orders over $129 (AU & NZ)

International rates calculated at checkout.

Expedited Dispatch

Order before 2pm AEST Mon–Fri for same day dispatch via Express shipping. Orders placed after 2pm or on weekends dispatch next business day.

Returns

30-day return window from date of delivery. Items must be unused and in original packaging. Contact us to initiate a return — return address provided upon approval.

Warranty

All Dialedin products carry a 12-month warranty against manufacturing defects and failure. Consumables excluded.

For full details see our Shipping Policy and Return and Refund Policy